• Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
  • Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)
1 2

Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)

Eibach ERS 13.00 in. Length x 5.00 in. OD Conventional Rear Spring (1300.500.XXXX)

1300.500.0125

In stock

$77.71 USD
$100.08 USD $77.71 USD
kADDITIONAL DISCOUNTS APPLIED AT CHECKOUT Sold out

The Eibach ERS 13.00 in. length x 5.00 in. OD conventional rear spring is a high-performance suspension component designed to optimize vehicle handling and stability. Crafted by Eibach, this spring is engineered to provide the ideal balance between softness and firmness, ensuring maximum traction and control during aggressive driving. Its precise tuning helps reduce body roll, squat, and dive, enhancing cornering performance and overall ride quality. Constructed from durable materials, the spring maintains consistent performance under demanding conditions, making it suitable for both street and track applications.

Designed for use on various vehicles requiring a 13-inch length and 5-inch outer diameter rear spring, this component is ideal for suspension upgrades and tuning. It complements a range of chassis and engine configurations, offering improved adhesion and handling characteristics. The spring is a direct replacement or upgrade for stock components, providing a reliable and effective solution for performance-oriented driving. Installation typically involves standard bolt-on procedures, and the kit includes the spring itself, with compatibility confirmed for specific vehicle models and setups. Suitable for enthusiasts seeking enhanced stability and cornering grip, this spring delivers consistent, high-quality performance on the road or track.

Overview

Conventional Rear Spring by Eibach

A properly tuned spring system provides the muscle needed to transform the power derived from the engine of a racing car to the track through optimum adhesion. Suspension tuning is a precise balance. On one hand, the spring system should be soft enough to compensate for road irregularities assuring permanent road contact, while on the on the other hand the spring system must be firm enough to reduce the body roll, squat, and dive of the vehicle during cornering, acceleration and braking.

Features

  • Length: 13.00"
  • Diameter: 5.00" O.D.
  • Ultra Lightweight for Reduced Unsprung Mass
  • Maximum Travel in Combination with Smallest Block Heights
  • Lowest Side Loads with Load Center Ideally Located Relative to the Spring Axis
  • Precision Tolerances - The Tightest in the Industry
  • Each Spring Individually Tested and Rated

Benefits

  • Uncountable individual combination possibilities to create from standard spring components ex stock
  • High spring travel (deflection) and therefore high end loads at short mounting lengths
  • Block resistance
  • Surface treated through shot-peening
  • High dynamic durability (component longevity)
  • Precise tolerances
  • High quality corrosion protection by phosphating and epoxy coating
  • Individual protective packaging
  • Easy identification (imprinted with Part no.-indicates spring rate and physical dimensions)

Applications

  • Universal

What's In The Box?

  • 1 - Spring

Warranty

  • Eibach Million-Mile Warranty
View full details