Skip to product information
1 of 3

HKS Super Fire Racing Coil Pro | Nissan Skyline GT-R (BNR32) (43005-AN001)

HKS Super Fire Racing Coil Pro | Nissan Skyline GT-R (BNR32) (43005-AN001)

SKU:43005-AN001

In stock

Regular price $1,630.00 USD
Regular price Sale price $1,630.00 USD
Sold out

The HKS SUPER FIRE RACING COIL PRO BNR32 is an ignition coil kit developed from the coils used in the HKS RB26 Complete Engine build. Compared with stock coils, it increases secondary voltage by up to 1.5 times to deliver a strong, reliable spark and help prevent misfires at high RPM. Anodized brackets and coil spacers support durability, while two O-rings on each spacer improve dust and water resistance on the engine side and reduce noise on the bracket side. Vehicle-specific rubber spark plug caps help resist flashover. The kit also features a long-life built-in power transistor designed to reduce aging and failure risk. Its dedicated bracket, spacers, harness, and caps are designed to simplify installation.

This kit is intended for the BNR32 application with the RB26 engine; no model years or additional vehicle fitments are specified in the provided information. Use it only with an ECU that allows dwell-time adjustment. Installing the stock spark plug cover requires cutting its rear section. HKS recommends using a transistor cover, part number 22998-AN001 to AN002, after removing the stock transistor. For best use of the coils’ potential, pair them with suitable spark plugs, such as the HKS SUPER FIRE RACING series. The source describes a vehicle-specific installation kit with a bracket, spacers, harness, and rubber spark plug caps, but does not specify a street or track use case.

Overview

Ignition coils featured in HKS RB26 Complete Engine build are now available in a separate kit!Compared to stock coils, secondary voltage is increased up to 1.5 times providing a strong and reliable spark and preventing misfire at high RPM.

- Anodized bracket and coil spacers for improved durability and beautiful look
- Coil spacer with two O-rings on both ends for improved dust and water resistance on the engine side and noise reduction no the bracket side
- Specially designed vehicle specific rubber spark plug cap to improve resistance against flashover
- Easy installation thanks to specially design bracket, spacer, harness and rubber spark plug cap
- Long life built-in power transistor with reduce risk of aging and failure

NOTE

- Use only with ECU that allows dwell time adjustment.
- To install the stock spark plug cover, it is required to cut a back part of it.
- It would be great to use the HKS transistor cover (Code No. 22998-AN001 to AN002) after removing the stock transistor for installing the product.
- Recommended to use with a spark plug able to utilize full potential of the coil, such as HKS SUPER FIRE RACING Series

View full details