| Year | Make | Model |
|---|---|---|
| 1999-2002 | Nissan | Skyline GT-R BNR34 |
HKS Super Fire Racing Coil Pro | Nissan Skyline GT-R R34 (43005-AN003)
HKS Super Fire Racing Coil Pro | Nissan Skyline GT-R R34 (43005-AN003)
SKU:43005-AN003
Out of stock
Couldn't load pickup availability
▶ Vehicle Fitments
The HKS Super Fire Racing Coil Pro is an ignition coil kit developed from the coils used in HKS RB26 Complete Engine builds. Compared with stock coils, it increases secondary voltage by up to 1.5 times to deliver a strong, reliable spark and help prevent misfires at high RPM. Anodized brackets and coil spacers provide improved durability, while two O-rings on each spacer help resist dust and water on the engine side and reduce noise on the bracket side. Vehicle-specific rubber spark plug caps are designed to improve resistance against flashover. The dedicated bracket, spacers, harness, and caps support straightforward installation. Kit part number: 43005-AN003.
Designed for the Nissan Skyline GT-R R34, this vehicle-specific coil kit is intended for applications using the RB26 engine; no model years are specified in the provided information. Installation requires an ECU that allows dwell-time adjustment. Fitting the stock spark plug cover requires cutting its rear section. HKS recommends removing the stock transistor and using an HKS transistor cover, part numbers 22998-AN001 to 22998-AN002, for installation. The kit includes a specially designed bracket, coil spacers, harness, and rubber spark plug caps. For best use of the coils’ potential, HKS recommends compatible spark plugs such as those in the SUPER FIRE RACING series. The source does not specify a particular street or track use.
Share
Overview
Overview
Ignition coils featured in HKS RB26 Complete Engine build are now available in a separate kit!Compared to stock coils, secondary voltage is increased up to 1.5 times providing a strong and reliable spark and preventing misfire at high RPM.
- Anodized bracket and coil spacers for improved durability and beautiful look
- Coil spacer with two O-rings on both ends for improved dust and water resistance on the engine side and noise reduction no the bracket side
- Specially designed vehicle specific rubber spark plug cap to improve resistance against flashover
- Easy installation thanks to specially design bracket, spacer, harness and rubber spark plug cap
NOTE
- Use only with ECU that allows dwell time adjustment.
- To install the stock spark plug cover, it is required to cut a back part of it.
- It would be great to use the HKS transistor cover (Code No. 22998-AN001 to AN002) after removing the stock transistor for installing the product.
- Recommended to use with a spark plug able to utilize full potential of the coil, such as HKS SUPER FIRE RACING Series